BLITZ Mini F7 Stack Mini F7+55A ESC 4-in1

PRODUCT DESCRIPTION

FC // BLITZ Mini F7 Flight Controller

• Top Features:– DJI HD VTX CONNECTOR (PLUG-AND-PLAY / NO SOLDERING REQUIRED)
  Specs:GYRO:   MPU6000OSD CHIP:   AT7456UARTS:   6I2C SERIAL:   SDA / SLA PADSLED CONTROLLER:   YESFIRMWARE TARGET:   IFRC-IFLIGHT_BLITZ_F722DIMENSIONS:   30.5X27 MM
  – UART 1 FOR VTX HD / ANALOG- UART 3/4/5 FOR GPS OR OTHER SENSORS THAT REQUIRE A SERIAL PORT
  1. F722 MCU HAS AN INNER INVERTER.3. FRSKY SMARTPORT, TRAMP & SMARTAUDIO CAN BE CONNECTED TO ANY UNUSED UART_TX, WE SUGGEST YOU CONNECT TO UART_TX1
• 4. F.PORT CAN BE CONNECTED TO ANY UNUSED UART_TX, WE SUGGEST YOU CONNECT TO UART_TX2
• 2. SBUS, CRSF, ELRS, IBUS, DSM ETC… CAN BE CONNECTED TO ANY UNUSED UART_RX, WE SUGGEST YOU CONNECT TO UART_RX2
• TIPS
• – UART 6 FOR ESC TELEMETRY
• – UART 2 FOR A RECEIVER
• WIRING SUGGESTION:
• WEIGHT:   5G
• MOUNT PATTERN:   20X20 MM / 4MM PCB HOLE DIAMETER, SILICON GROMMETS FOR M3 SCREWS
• BEEPER PAD:   YES
• SMARTAUDIO / IRC TRAMP VTX PROTOCOL SUPPORTED
• MOTOR OUTPUTS:   4X (SH1.0 CONNECTOR)
• FLASH:   16MB (BLACKBOX FLASH)
• BAROMETER:   NO
• MCU:   STM32 F722
•  
• – FC INDICATOR LEDS FOR VISUAL DEBUGGING
• – IMPROVED CIRCUIT DESIGN, BETTER COMPONENTS AND LOWER ELECTRICAL NOISE!

ESC // BLITZ Mini E55 4-IN-1 2-6S ESC

• SPECIFICATION:
  – MOUNTING HOLES: 20*20MM/Φ4MM- SUPPORTS 2-6S LIPO INPUT- CONSTANT: 55 AMPS – CURRENT SENSOR: YES- CURRENT RATE: 100
  – FIRMWARE: BLHELI 32
• – TARGET:   IFLIGHT_BLITZ_G1
• – SUPPORTS: DSHOT DSHOT150/300/600/MULTISHOT/ ONESHOT ETC.
• – BEC: NO
• – BURST: 60 AMPS
• – MCU： G071
• – WEIGHT: 11.3G
• – DIMENSION: 35*42MM

Package included:

– 1pc x BLITZ Mini F7 Flight Controller

– 1pc x BLITZ Mini E55 4-IN-1 2-6S ESC

– 1set x silicon grommets

– 1set x wire harness for F7 Flight controller